ppmtosixel

Updated: 26 April 1991
Table Of Contents  

NAME

ppmtosixel - convert a PPM image to DEC sixel format  

SYNOPSIS

ppmtosixel [-raw] [-margin] [ppmfile]  

DESCRIPTION

This program is part of Netpbm.

ppmtosixel reads a PPM image as input and produces sixel commands (SIX) as output. The output is formatted for color printing, e.g. for a DEC LJ250 color inkjet printer.

If RGB values from the PPM file do not have maxval=100, ppmtosixel rescales them to maxval 100. A printer control header and a color assignment table begin the SIX file. Image data is in a compressed format by default. A printer control footer ends the image file.  

OPTIONS

-raw
If you specify this, each pixel will be explicitly described in the image file. If -raw is not specified, output will default to compressed format in which identical adjacent pixels are replaced by "repeat pixel" commands. A raw file is often an order of magnitude larger than a compressed file and prints much slower.
-margin
If you don't specify -margin, the image will start at the left margin (of the window, paper, or whatever). If you do specify -margin, a 1.5 inch left margin will offset the image.
 

PRINTING

Generally, sixel files must reach the printer unfiltered. Use the lpr -x option or cat filename > /dev/tty0?.  

LIMITATIONS

Upon rescaling, truncation of the least significant bits of RGB values may result in poor color conversion. If the original PPM maxval was greater than 100, rescaling also reduces the image depth. While the actual RGB values from the ppm file are more or less retained, the color palette of the LJ250 may not match the colors on your screen. This seems to be a printer limitation.  

SEE ALSO

ppm  

AUTHOR

Copyright (C) 1991 by Rick Vinci.
 

Table Of Contents