11.4 urllib -- Open arbitrary resources by URL

This module provides a high-level interface for fetching data across the World Wide Web. In particular, the urlopen() function is similar to the built-in function open(), but accepts Universal Resource Locators (URLs) instead of filenames. Some restrictions apply -- it can only open URLs for reading, and no seek operations are available.

It defines the following public functions:

urlopen( url[, data[, proxies]])
Open a network object denoted by a URL for reading. If the URL does not have a scheme identifier, or if it has file: as its scheme identifier, this opens a local file (without universal newlines); otherwise it opens a socket to a server somewhere on the network. If the connection cannot be made the IOError exception is raised. If all went well, a file-like object is returned. This supports the following methods: read(), readline(), readlines(), fileno(), close(), info() and geturl(). It also has proper support for the iterator protocol. One caveat: the read() method, if the size argument is omitted or negative, may not read until the end of the data stream; there is no good way to determine that the entire stream from a socket has been read in the general case.

Except for the info() and geturl() methods, these methods have the same interface as for file objects -- see section 2.3.9 in this manual. (It is not a built-in file object, however, so it can't be used at those few places where a true built-in file object is required.)

The info() method returns an instance of the class mimetools.Message containing meta-information associated with the URL. When the method is HTTP, these headers are those returned by the server at the head of the retrieved HTML page (including Content-Length and Content-Type). When the method is FTP, a Content-Length header will be present if (as is now usual) the server passed back a file length in response to the FTP retrieval request. A Content-Type header will be present if the MIME type can be guessed. When the method is local-file, returned headers will include a Date representing the file's last-modified time, a Content-Length giving file size, and a Content-Type containing a guess at the file's type. See also the description of the mimetools module.

The geturl() method returns the real URL of the page. In some cases, the HTTP server redirects a client to another URL. The urlopen() function handles this transparently, but in some cases the caller needs to know which URL the client was redirected to. The geturl() method can be used to get at this redirected URL.

If the url uses the http: scheme identifier, the optional data argument may be given to specify a POST request (normally the request type is GET). The data argument must be in standard application/x-www-form-urlencoded format; see the urlencode() function below.

The urlopen() function works transparently with proxies which do not require authentication. In a Unix or Windows environment, set the http_proxy, ftp_proxy or gopher_proxy environment variables to a URL that identifies the proxy server before starting the Python interpreter. For example (the "%" is the command prompt):

% http_proxy="http://www.someproxy.com:3128"
% export http_proxy
% python
...

In a Windows environment, if no proxy environment variables are set, proxy settings are obtained from the registry's Internet Settings section.

In a Macintosh environment, urlopen() will retrieve proxy information from Internet Config.

Alternatively, the optional proxies argument may be used to explicitly specify proxies. It must be a dictionary mapping scheme names to proxy URLs, where an empty dictionary causes no proxies to be used, and None (the default value) causes environmental proxy settings to be used as discussed above. For example:

# Use http://www.someproxy.com:3128 for http proxying
proxies = {'http': 'http://www.someproxy.com:3128'}
filehandle = urllib.urlopen(some_url, proxies=proxies)
# Don't use any proxies
filehandle = urllib.urlopen(some_url, proxies={})
# Use proxies from environment - both versions are equivalent
filehandle = urllib.urlopen(some_url, proxies=None)
filehandle = urllib.urlopen(some_url)

The urlopen() function does not support explicit proxy specification. If you need to override environmental proxy settings, use URLopener, or a subclass such as FancyURLopener.

Proxies which require authentication for use are not currently supported; this is considered an implementation limitation.

Changed in version 2.3: Added the proxies support.

urlretrieve( url[, filename[, reporthook[, data]]])
Copy a network object denoted by a URL to a local file, if necessary. If the URL points to a local file, or a valid cached copy of the object exists, the object is not copied. Return a tuple (filename, headers) where filename is the local file name under which the object can be found, and headers is whatever the info() method of the object returned by urlopen() returned (for a remote object, possibly cached). Exceptions are the same as for urlopen().

The second argument, if present, specifies the file location to copy to (if absent, the location will be a tempfile with a generated name). The third argument, if present, is a hook function that will be called once on establishment of the network connection and once after each block read thereafter. The hook will be passed three arguments; a count of blocks transferred so far, a block size in bytes, and the total size of the file. The third argument may be -1 on older FTP servers which do not return a file size in response to a retrieval request.

If the url uses the http: scheme identifier, the optional data argument may be given to specify a POST request (normally the request type is GET). The data argument must in standard application/x-www-form-urlencoded format; see the urlencode() function below.

_urlopener
The public functions urlopen() and urlretrieve() create an instance of the FancyURLopener class and use it to perform their requested actions. To override this functionality, programmers can create a subclass of URLopener or FancyURLopener, then assign an instance of that class to the urllib._urlopener variable before calling the desired function. For example, applications may want to specify a different User-Agent: header than URLopener defines. This can be accomplished with the following code:

import urllib

class AppURLopener(urllib.FancyURLopener):
    version = "App/1.7"

urllib._urlopener = AppURLopener()

urlcleanup( )
Clear the cache that may have been built up by previous calls to urlretrieve().

quote( string[, safe])
Replace special characters in string using the "%xx" escape. Letters, digits, and the characters "_.-" are never quoted. The optional safe parameter specifies additional characters that should not be quoted -- its default value is '/'.

Example: quote('/~connolly/') yields '/%7econnolly/'.

quote_plus( string[, safe])
Like quote(), but also replaces spaces by plus signs, as required for quoting HTML form values. Plus signs in the original string are escaped unless they are included in safe. It also does not have safe default to '/'.

unquote( string)
Replace "%xx" escapes by their single-character equivalent.

Example: unquote('/%7Econnolly/') yields '/~connolly/'.

unquote_plus( string)
Like unquote(), but also replaces plus signs by spaces, as required for unquoting HTML form values.

urlencode( query[, doseq])
Convert a mapping object or a sequence of two-element tuples to a ``url-encoded'' string, suitable to pass to urlopen() above as the optional data argument. This is useful to pass a dictionary of form fields to a POST request. The resulting string is a series of key=value pairs separated by "&" characters, where both key and value are quoted using quote_plus() above. If the optional parameter doseq is present and evaluates to true, individual key=value pairs are generated for each element of the sequence. When a sequence of two-element tuples is used as the query argument, the first element of each tuple is a key and the second is a value. The order of parameters in the encoded string will match the order of parameter tuples in the sequence. The cgi module provides the functions parse_qs() and parse_qsl() which are used to parse query strings into Python data structures.

pathname2url( path)
Convert the pathname path from the local syntax for a path to the form used in the path component of a URL. This does not produce a complete URL. The return value will already be quoted using the quote() function.

url2pathname( path)
Convert the path component path from an encoded URL to the local syntax for a path. This does not accept a complete URL. This function uses unquote() to decode path.

class URLopener( [proxies[, **x509]])
Base class for opening and reading URLs. Unless you need to support opening objects using schemes other than http:, ftp:, gopher: or file:, you probably want to use FancyURLopener.

By default, the URLopener class sends a User-Agent: header of "urllib/VVV", where VVV is the urllib version number. Applications can define their own User-Agent: header by subclassing URLopener or FancyURLopener and setting the class attribute version to an appropriate string value in the subclass definition.

The optional proxies parameter should be a dictionary mapping scheme names to proxy URLs, where an empty dictionary turns proxies off completely. Its default value is None, in which case environmental proxy settings will be used if present, as discussed in the definition of urlopen(), above.

Additional keyword parameters, collected in x509, are used for authentication with the https: scheme. The keywords key_file and cert_file are supported; both are needed to actually retrieve a resource at an https: URL.

URLopener objects will raise an IOError exception if the server returns an error code.

class FancyURLopener( ...)
FancyURLopener subclasses URLopener providing default handling for the following HTTP response codes: 301, 302, 303, 307 and 401. For the 30x response codes listed above, the Location: header is used to fetch the actual URL. For 401 response codes (authentication required), basic HTTP authentication is performed. For the 30x response codes, recursion is bounded by the value of the maxtries attribute, which defaults to 10.

For all other response codes, the method http_error_default() is called which you can override in subclasses to handle the error appropriately.

Note: According to the letter of RFC 2616, 301 and 302 responses to POST requests must not be automatically redirected without confirmation by the user. In reality, browsers do allow automatic redirection of these responses, changing the POST to a GET, and urllib reproduces this behaviour.

The parameters to the constructor are the same as those for URLopener.

Note: When performing basic authentication, a FancyURLopener instance calls its prompt_user_passwd() method. The default implementation asks the users for the required information on the controlling terminal. A subclass may override this method to support more appropriate behavior if needed.

Restrictions:



Subsections
See About this document... for information on suggesting changes.