All options can be abbreviated to their shortest unique prefix. You may use two hyphens instead of one to designate an option. You may use either white space or an equals sign between an option name and its value.
This program is part of Netpbm.
pnmremap replaces the colors in an input image with those from a palette you specify. Where colors in the input are present in the palette, they just stay the same in the output. But where the input contains a color that is not in the palette, pnmremap gives you three choices: 1) choose the closest color from the palette; 2) choose the first color from the palette; 3) use a color specified by a command option.
You can also dither, which means rather than mapping pixel by pixel, pnmremap uses colors from the palette to try to make multi-pixel regions of the output have the same average color as the input.
Two reasons to do this are: 1) you want to reduce the number of colors in the input image; and 2) you need to feed the image to something that can handle only certain colors.
To reduce colors, you can generate the palette with pnmcolormap.
By default, pnmremap maps an input color that is not in the palette to the closest color that is in the palette. Closest means with the smallest cartesian distance in the red, green, blue brightness space (smallest sum of the squares of the differences in red, greeN, and blue ITU-R Recommedation BT.709 gamma-adjusted intensities).
You can instead specify a single default color for pnmremap to use for any color in the input image that is not in the palette. Use the -missing option for this.
You can also specify that the first color in the palette image is the default. Use the -firstisdefault option for this.
The palette is simply a PNM image. The colors of the pixels in the image are the colors in the palette. Where the pixels appear in the image, and the dimensions of the image, are irrelevant. Multiple pixels of the same color are fine. However, a palette image is typically a single row with one pixel per color.
If you specify -missing, the color you so specify is in the palette in addition to whatever is in the palette image.
For historical reasons, Netpbm sometimes calls the palette a "colormap." But it doesn't really map anything. pnmremap creates its own map, based on the palette, to map colors from the input image to output colors.
In the simple case, the palette image is of the same depth (number of planes, i.e. number of components in each tuple (pixel)) as the input image and pnmremap just does a straightforward search of the palette for each input tuple (pixel). In fact, pnmremap doesn't even care if the image is a visual image.
But what about when the depths differ? In that case, pnmremap converts the input image (in its own memory) to match the palette and then proceeds as above.
There are only two such cases in which pnmremap knows how to do the conversion: when one of them is tuple type RGB, depth 3, and the other is tuple type GRAYSCALE or BLACKANDWHITE, depth 1; and vice versa.
In any other case, pnmremap issues and error message and fails.
Note that as long as your input and palette images are PNM, they'll always fall into one of the cases pnmremap can handle. There's an issue only if you're using some exotic PAM image.
Before Netpbm 10.27 (March 2005), pnmremap could not handle the case of a palette of greater depth than the input image. (It would issue an error message and fail in that case).
In any case, the output image has the same tuple type and depth as the palette image.
pnmremap handles a multiple image input stream, producing a multiple image output stream. The input images need not be similar in any way.
Before Netpbm 10.30 (October 2005), pnmremap ignored any image after the first.
pnmcolormap testimg.ppm 256 >palette.ppm pnmremap -map=palette.ppm testimg.ppm >reduced_testimg.ppm
To limit colors to a certain set, a typical example is to create an image for posting on the World Wide Web, where different browsers know different colors. But all browsers are supposed to know the 216 "web safe" colors which are essentially all the colors you can represent in a PPM image with a maxval of 5. So you can do this:
pamseq 3 5 >websafe.pam pnmremap -map=websafe.pam testimg.ppm >websafe_testimg.ppm
Another useful palette is one for the 8 color IBM TTL color set, which you can create with
pamseq 3 1 >ibmttl.pam
If you want to quantize one image to use the colors in another one, just use the second one as the palette. You don't have to reduce it down to only one pixel of each color, just use it as is.
The output image has the same type and maxval as the palette image.
There is one parameter, which is required: The file specification of the input PNM file.
This option is mandatory.
Floyd-Steinberg gives vastly better results on images where unmodified quantization has banding or other artifacts, especially when going to a small number of colors such as the above IBM set. However, it does take substantially more CPU time.
-fs is a synomym for -floyd. -nofs is a synonym for -nofloyd.
The default is -nofloyd.
See DESCRIPTION.
If you specify -firstisdefault, the maxval of your input must match the maxval of your palette image.
If you specify -missingcolor, the maxval of your input must match the maxval of your palette image.