New in version 2.4.
This module implements high-performance container datatypes. Currently, there are two datatypes, deque and defaultdict, and one datatype factory function, namedtuple().
Changed in version 2.5: Added defaultdict.
Changed in version 2.6: Added namedtuple().
The specialized containers provided in this module provide alternatives to Python’s general purpose built-in containers, dict, list, set, and tuple.
Besides the containers provided here, the optional bsddb module offers the ability to create in-memory or file based ordered dictionaries with string keys using the bsddb.btopen() method.
In addition to containers, the collections module provides some ABCs (abstract base classes) that can be used to test whether a class provides a particular interface, for example, is it hashable or a mapping.
Changed in version 2.6: Added abstract base classes.
The collections module offers the following ABCs:
| ABC | Inherits | Abstract Methods | Mixin Methods |
|---|---|---|---|
| Container | __contains__ | ||
| Hashable | __hash__ | ||
| Iterable | __iter__ | ||
| Iterator | Iterable | next | __iter__ |
| Sized | __len__ | ||
| Callable | __call__ | ||
| Sequence | Sized, Iterable, Container | __getitem__ | __contains__. __iter__, __reversed__. index, and count |
| MutableSequence | Sequence | __setitem__ __delitem__, and insert | Inherited Sequence methods and append, reverse, extend, pop, remove, and __iadd__ |
| Set | Sized, Iterable, Container | __le__, __lt__, __eq__, __ne__, __gt__, __ge__, __and__, __or__ __sub__, __xor__, and isdisjoint | |
| MutableSet | Set | add and discard | Inherited Set methods and clear, pop, remove, __ior__, __iand__, __ixor__, and __isub__ |
| Mapping | Sized, Iterable, Container | __getitem__ | __contains__, keys, items, values, get, __eq__, and __ne__ |
| MutableMapping | Mapping | __setitem__ and __delitem__ | Inherited Mapping methods and pop, popitem, clear, update, and setdefault |
| MappingView | Sized | __len__ | |
| KeysView | MappingView, Set | __contains__, __iter__ | |
| ItemsView | MappingView, Set | __contains__, __iter__ | |
| ValuesView | MappingView | __contains__, __iter__ |
These ABCs allow us to ask classes or instances if they provide particular functionality, for example:
size = None
if isinstance(myvar, collections.Sized):
size = len(myvar)
Several of the ABCs are also useful as mixins that make it easier to develop classes supporting container APIs. For example, to write a class supporting the full Set API, it only necessary to supply the three underlying abstract methods: __contains__(), __iter__(), and __len__(). The ABC supplies the remaining methods such as __and__() and isdisjoint()
class ListBasedSet(collections.Set):
''' Alternate set implementation favoring space over speed
and not requiring the set elements to be hashable. '''
def __init__(self, iterable):
self.elements = lst = []
for value in iterable:
if value not in lst:
lst.append(value)
def __iter__(self):
return iter(self.elements)
def __contains__(self, value):
return value in self.elements
def __len__(self):
return len(self.elements)
s1 = ListBasedSet('abcdef')
s2 = ListBasedSet('defghi')
overlap = s1 & s2 # The __and__() method is supported automatically
Notes on using Set and MutableSet as a mixin:
See also
Returns a new deque object initialized left-to-right (using append()) with data from iterable. If iterable is not specified, the new deque is empty.
Deques are a generalization of stacks and queues (the name is pronounced “deck” and is short for “double-ended queue”). Deques support thread-safe, memory efficient appends and pops from either side of the deque with approximately the same O(1) performance in either direction.
Though list objects support similar operations, they are optimized for fast fixed-length operations and incur O(n) memory movement costs for pop(0) and insert(0, v) operations which change both the size and position of the underlying data representation.
New in version 2.4.
If maxlen is not specified or is None, deques may grow to an arbitrary length. Otherwise, the deque is bounded to the specified maximum length. Once a bounded length deque is full, when new items are added, a corresponding number of items are discarded from the opposite end. Bounded length deques provide functionality similar to the tail filter in Unix. They are also useful for tracking transactions and other pools of data where only the most recent activity is of interest.
Changed in version 2.6: Added maxlen parameter.
Deque objects support the following methods:
Removed the first occurrence of value. If not found, raises a ValueError.
New in version 2.5.
In addition to the above, deques support iteration, pickling, len(d), reversed(d), copy.copy(d), copy.deepcopy(d), membership testing with the in operator, and subscript references such as d[-1]. Indexed access is O(1) at both ends but slows to O(n) in the middle. For fast random access, use lists instead.
Example:
>>> from collections import deque
>>> d = deque('ghi') # make a new deque with three items
>>> for elem in d: # iterate over the deque's elements
... print elem.upper()
G
H
I
>>> d.append('j') # add a new entry to the right side
>>> d.appendleft('f') # add a new entry to the left side
>>> d # show the representation of the deque
deque(['f', 'g', 'h', 'i', 'j'])
>>> d.pop() # return and remove the rightmost item
'j'
>>> d.popleft() # return and remove the leftmost item
'f'
>>> list(d) # list the contents of the deque
['g', 'h', 'i']
>>> d[0] # peek at leftmost item
'g'
>>> d[-1] # peek at rightmost item
'i'
>>> list(reversed(d)) # list the contents of a deque in reverse
['i', 'h', 'g']
>>> 'h' in d # search the deque
True
>>> d.extend('jkl') # add multiple elements at once
>>> d
deque(['g', 'h', 'i', 'j', 'k', 'l'])
>>> d.rotate(1) # right rotation
>>> d
deque(['l', 'g', 'h', 'i', 'j', 'k'])
>>> d.rotate(-1) # left rotation
>>> d
deque(['g', 'h', 'i', 'j', 'k', 'l'])
>>> deque(reversed(d)) # make a new deque in reverse order
deque(['l', 'k', 'j', 'i', 'h', 'g'])
>>> d.clear() # empty the deque
>>> d.pop() # cannot pop from an empty deque
Traceback (most recent call last):
File "<pyshell#6>", line 1, in -toplevel-
d.pop()
IndexError: pop from an empty deque
>>> d.extendleft('abc') # extendleft() reverses the input order
>>> d
deque(['c', 'b', 'a'])
This section shows various approaches to working with deques.
Bounded length deques provide functionality similar to the tail filter in Unix:
def tail(filename, n=10):
'Return the last n lines of a file'
return deque(open(filename), n)
Another approach to using deques is to maintain a sequence of recently added elements by appending to the right and popping to the left:
def moving_average(iterable, n=3):
# moving_average([40, 30, 50, 46, 39, 44]) --> 40.0 42.0 45.0 43.0
# http://en.wikipedia.org/wiki/Moving_average
it = iter(iterable)
d = deque(itertools.islice(it, n-1))
d.appendleft(0)
s = sum(d)
for elem in it:
s += elem - d.popleft()
d.append(elem)
yield s / float(n)
The rotate() method provides a way to implement deque slicing and deletion. For example, a pure Python implementation of del d[n] relies on the rotate() method to position elements to be popped:
def delete_nth(d, n):
d.rotate(-n)
d.popleft()
d.rotate(n)
To implement deque slicing, use a similar approach applying rotate() to bring a target element to the left side of the deque. Remove old entries with popleft(), add new entries with extend(), and then reverse the rotation. With minor variations on that approach, it is easy to implement Forth style stack manipulations such as dup, drop, swap, over, pick, rot, and roll.
Returns a new dictionary-like object. defaultdict is a subclass of the built-in dict class. It overrides one method and adds one writable instance variable. The remaining functionality is the same as for the dict class and is not documented here.
The first argument provides the initial value for the default_factory attribute; it defaults to None. All remaining arguments are treated the same as if they were passed to the dict constructor, including keyword arguments.
New in version 2.5.
defaultdict objects support the following method in addition to the standard dict operations:
If the default_factory attribute is None, this raises a KeyError exception with the key as argument.
If default_factory is not None, it is called without arguments to provide a default value for the given key, this value is inserted in the dictionary for the key, and returned.
If calling default_factory raises an exception this exception is propagated unchanged.
This method is called by the __getitem__() method of the dict class when the requested key is not found; whatever it returns or raises is then returned or raised by __getitem__().
defaultdict objects support the following instance variable:
Using list as the default_factory, it is easy to group a sequence of key-value pairs into a dictionary of lists:
>>> s = [('yellow', 1), ('blue', 2), ('yellow', 3), ('blue', 4), ('red', 1)]
>>> d = defaultdict(list)
>>> for k, v in s:
... d[k].append(v)
...
>>> d.items()
[('blue', [2, 4]), ('red', [1]), ('yellow', [1, 3])]
When each key is encountered for the first time, it is not already in the mapping; so an entry is automatically created using the default_factory function which returns an empty list. The list.append() operation then attaches the value to the new list. When keys are encountered again, the look-up proceeds normally (returning the list for that key) and the list.append() operation adds another value to the list. This technique is simpler and faster than an equivalent technique using dict.setdefault():
>>> d = {}
>>> for k, v in s:
... d.setdefault(k, []).append(v)
...
>>> d.items()
[('blue', [2, 4]), ('red', [1]), ('yellow', [1, 3])]
Setting the default_factory to int makes the defaultdict useful for counting (like a bag or multiset in other languages):
>>> s = 'mississippi'
>>> d = defaultdict(int)
>>> for k in s:
... d[k] += 1
...
>>> d.items()
[('i', 4), ('p', 2), ('s', 4), ('m', 1)]
When a letter is first encountered, it is missing from the mapping, so the default_factory function calls int() to supply a default count of zero. The increment operation then builds up the count for each letter.
The function int() which always returns zero is just a special case of constant functions. A faster and more flexible way to create constant functions is to use itertools.repeat() which can supply any constant value (not just zero):
>>> def constant_factory(value):
... return itertools.repeat(value).next
>>> d = defaultdict(constant_factory('<missing>'))
>>> d.update(name='John', action='ran')
>>> '%(name)s %(action)s to %(object)s' % d
'John ran to <missing>'
Setting the default_factory to set makes the defaultdict useful for building a dictionary of sets:
>>> s = [('red', 1), ('blue', 2), ('red', 3), ('blue', 4), ('red', 1), ('blue', 4)]
>>> d = defaultdict(set)
>>> for k, v in s:
... d[k].add(v)
...
>>> d.items()
[('blue', set([2, 4])), ('red', set([1, 3]))]
Named tuples assign meaning to each position in a tuple and allow for more readable, self-documenting code. They can be used wherever regular tuples are used, and they add the ability to access fields by name instead of position index.
Returns a new tuple subclass named typename. The new subclass is used to create tuple-like objects that have fields accessible by attribute lookup as well as being indexable and iterable. Instances of the subclass also have a helpful docstring (with typename and field_names) and a helpful __repr__() method which lists the tuple contents in a name=value format.
The field_names are a single string with each fieldname separated by whitespace and/or commas, for example 'x y' or 'x, y'. Alternatively, field_names can be a sequence of strings such as ['x', 'y'].
Any valid Python identifier may be used for a fieldname except for names starting with an underscore. Valid identifiers consist of letters, digits, and underscores but do not start with a digit or underscore and cannot be a keyword such as class, for, return, global, pass, print, or raise.
If verbose is true, the class definition is printed just before being built.
Named tuple instances do not have per-instance dictionaries, so they are lightweight and require no more memory than regular tuples.
New in version 2.6.
Example:
>>> Point = namedtuple('Point', 'x y')
>>> p = Point(11, y=22) # instantiate with positional or keyword arguments
>>> p[0] + p[1] # indexable like the plain tuple (11, 22)
33
>>> x, y = p # unpack like a regular tuple
>>> x, y
(11, 22)
>>> p.x + p.y # fields also accessible by name
33
>>> p # readable __repr__ with a name=value style
Point(x=11, y=22)
>>> Point = namedtuple('Point', 'x y', verbose=True) # show the class definition
class Point(tuple):
'Point(x, y)'
__slots__ = ()
_fields = ('x', 'y')
def __new__(_cls, x, y):
return _tuple.__new__(_cls, (x, y))
@classmethod
def _make(cls, iterable, new=tuple.__new__, len=len):
'Make a new Point object from a sequence or iterable'
result = new(cls, iterable)
if len(result) != 2:
raise TypeError('Expected 2 arguments, got %d' % len(result))
return result
def __repr__(self):
return 'Point(x=%r, y=%r)' % self
def _asdict(t):
'Return a new dict which maps field names to their values'
return {'x': t[0], 'y': t[1]}
def _replace(_self, **kwds):
'Return a new Point object replacing specified fields with new values'
result = _self._make(map(kwds.pop, ('x', 'y'), _self))
if kwds:
raise ValueError('Got unexpected field names: %r' % kwds.keys())
return result
def __getnewargs__(self):
return tuple(self)
x = _property(_itemgetter(0))
y = _property(_itemgetter(1))
Named tuples are especially useful for assigning field names to result tuples returned by the csv or sqlite3 modules:
EmployeeRecord = namedtuple('EmployeeRecord', 'name, age, title, department, paygrade')
import csv
for emp in map(EmployeeRecord._make, csv.reader(open("employees.csv", "rb"))):
print emp.name, emp.title
import sqlite3
conn = sqlite3.connect('/companydata')
cursor = conn.cursor()
cursor.execute('SELECT name, age, title, department, paygrade FROM employees')
for emp in map(EmployeeRecord._make, cursor.fetchall()):
print emp.name, emp.title
In addition to the methods inherited from tuples, named tuples support three additional methods and one attribute. To prevent conflicts with field names, the method and attribute names start with an underscore.
Class method that makes a new instance from an existing sequence or iterable.
>>> t = [11, 22]
>>> Point._make(t)
Point(x=11, y=22)
Return a new dict which maps field names to their corresponding values:
>>> p._asdict()
{'x': 11, 'y': 22}
Return a new instance of the named tuple replacing specified fields with new values:
>>> p = Point(x=11, y=22)
>>> p._replace(x=33)
Point(x=33, y=22)
>>> for partnum, record in inventory.items():
... inventory[partnum] = record._replace(price=newprices[partnum], timestamp=time.now())
Tuple of strings listing the field names. Useful for introspection and for creating new named tuple types from existing named tuples.
>>> p._fields # view the field names
('x', 'y')
>>> Color = namedtuple('Color', 'red green blue')
>>> Pixel = namedtuple('Pixel', Point._fields + Color._fields)
>>> Pixel(11, 22, 128, 255, 0)
Pixel(x=11, y=22, red=128, green=255, blue=0)
To retrieve a field whose name is stored in a string, use the getattr() function:
>>> getattr(p, 'x')
11
To convert a dictionary to a named tuple, use the double-star-operator (as described in Unpacking Argument Lists):
>>> d = {'x': 11, 'y': 22}
>>> Point(**d)
Point(x=11, y=22)
Since a named tuple is a regular Python class, it is easy to add or change functionality with a subclass. Here is how to add a calculated field and a fixed-width print format:
>>> class Point(namedtuple('Point', 'x y')): ... __slots__ = () ... @property ... def hypot(self): ... return (self.x ** 2 + self.y ** 2) ** 0.5 ... def __str__(self): ... return 'Point: x=%6.3f y=%6.3f hypot=%6.3f' % (self.x, self.y, self.hypot)>>> for p in Point(3, 4), Point(14, 5/7.): ... print p Point: x= 3.000 y= 4.000 hypot= 5.000 Point: x=14.000 y= 0.714 hypot=14.018
The subclass shown above sets __slots__ to an empty tuple. This helps keep memory requirements low by preventing the creation of instance dictionaries.
Subclassing is not useful for adding new, stored fields. Instead, simply create a new named tuple type from the _fields attribute:
>>> Point3D = namedtuple('Point3D', Point._fields + ('z',))
Default values can be implemented by using _replace() to customize a prototype instance:
>>> Account = namedtuple('Account', 'owner balance transaction_count')
>>> default_account = Account('<owner name>', 0.0, 0)
>>> johns_account = default_account._replace(owner='John')
Enumerated constants can be implemented with named tuples, but it is simpler and more efficient to use a simple class declaration:
>>> Status = namedtuple('Status', 'open pending closed')._make(range(3))
>>> Status.open, Status.pending, Status.closed
(0, 1, 2)
>>> class Status:
... open, pending, closed = range(3)
See also
Named tuple recipe adapted for Python 2.4.